Samsung Releases Android 4.1.2 XXDLK7 Jelly Bean for Galaxy Note 2 LTE N7105 [How to Install]

Samsung has reportedly released Android 4.1.2 (Jelly Bean) update based on XXDLK7 for the LTE variant of Galaxy Note 2 with model number N7105, reports Sammobile.

Firmware details

Software version: Android 4.1.2

PDA: N7105XXDLK7

CSC: N7105OJVDLK5

Modem: N7105XXDLK7

The firmware at present is available for the users in South Africa however it is compatible with a number of European countries including the UK. The Galaxy Note 2 LTE users, who wish to install the update manually, may follow the tutorial below. IBTimes UK reminds its readers that it will not be responsible for any damage to the device during installation. The users are also advised to verify the model number of their devices before following the guide since the aforementioned Jelly Bean build is only compatible with Galaxy Note 2 LTE N7105.

Pre-requisite

1) Install USB Drivers for Galaxy Note 2 LTE on your computer and also enable the USB Debugging mode.

2) Ensure that the battery of the device carries more than 80 per cent of charge.

3) Create back-up of all your important data before proceeding.

4) Ensure that your device is factory unlocked.

Steps to install Android 4.1.2 XXDLK7 on Galaxy Note 2 LTE N7105

1) Download Android 4.1.2 XXDLK7 Jelly Bean firmware for Galaxy Note 2 LTE to your computer. Extract the firmware zip file

2) Download Odin v3.07 and extract the file

3) Power off the phone and place it into Download Mode. To do so press Volume Down, Home and Power buttons together. You should then see a warning message on the screen, now press the Volume Up button to enter into Download Mode

4) Open Odin v3.07 on the computer. Connect the Note 2 to the computer using the USB cable. You will get to see a message saying Added under Odin's message box. You should also see COM port with a number in Yellow if the device is successfully connected to the computer

5) Now select these files in the order mentioned below to install on your phone

a) Click the PDA button and select file named Code

b) Click the Phone button and select file named Modem

c) Click the CSC button and select file named CSC

d) Click the PIT button and select the .pit file

Note: You may ignore last three steps if files by such name are not found.

6) After you have double checked everything, hit the Start button in Odin to begin the installation process

7) Upon the completion of the installation process, you will get to see a Pass message with green background at the top of Odin. The phone will then automatically reboot. You can disconnect the phone from the computer once you get to see the Samsung logo on the screen

Congratulations! the Android 4.1.2 XXDLK7 Jelly Bean official firmware is now installed and running on your Samsung Galaxy Note 2 LTE N7105. Head over to Settings>> About Phone to verify the software update on your device.

[Source: Android Jinn]