Samsung Releases Official Android 4.2.2 for Galaxy Tab 2 10.1 P5100 [How to Install]

Samsung has rolled out Android 4.2.2 software update for the international 3G + Wi-Fi version of Galaxy Tab 2 10.1 with model number GT-P5100, which is running on Android version 4.1.2. With base firmware P5100XXDMH1, the Jelly Bean update is currently available for the Galaxy tablet users in France.

Firmware details

PDA: P5100XXDMH1

CSC: P5100OXADDMH1

Modem: P5100XXDMG1

Version: Android 4.2.2

Built date: 3 August, 2013

Country: France

Region: Europe

Users grab the official build as Over-The-Air (OTA) update and through Samsung Kies server. Those who failed to update their tablets using either of the official methods for being region specific, may follow our step-by-step guide to install the firmware manually. It should be noted XXDMH1 is an unbranded version of firmware and can be installed on any unlocked GT-P5100 units, irrespective of region and country.

IBTimes UK reminds its readers that it will not be held liable for any mishap. Users are advised to verify that their devices meet following requirements.

Pre-requisites

1) Install USB Drivers for Samsung Galaxy Tab 2 10.0 to connect the Android device with computer.

2) Enable USB Debugging Mode on tablet to connect it with the computer and use Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and check USB Debugging Mode.]

3) As the tutorial is likely to wipe all data of the tablet, create a backup. If the device is having any custom recoveries such as ClockworkMod/TWRP installed then backup all the data using the recovery.

4) Ensure the battery of the Galaxy tablet is having charge above 80%.

5) The tablet should be factory unlocked and not locked to a particular carrier.

6) The device will no longer belong to a rooted version once official firmware is installed.

7) The tablet will lose custom firmware with the installation of official build. Additionally, the custom recovery will be replaced by stock recovery.

8) XXDMH1 Android 4.2.2 Jelly Bean works only with Samsung Galaxy Tab 2 10.1 GT-P5100. As flashing this on any incorrect variant might brick the device, verify the model number of the Galaxy Tab 2 10.1 by navigating to Settings>> About tablet>> Model number.

Steps to install XXDMH1 Android 4.2.2 on Samsung Galaxy Tab 2 10.1 GT-P5100

Step-1: Download XXDMH1 Android 4.2.2 Jelly Bean official update for Samsung Galaxy Tab 2 10.1 to computer

Step-2: Extract the downloaded firmware zip using winrar/7zip/winzip or any other extracting tool to get a file with .tar.md5 extension with some other files

Step-3: Download Odin v3.07. Extract the Odin zip to get Odin3 v3.07.exe and few other files

Step-4: Turn off the Galaxy tablet and wait for about five to six seconds for vibration to confirm complete power off

Step-5: Boot the Galaxy Tab into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on the screen. Now press the Volume Up button to continue to enter into Download Mode

Step-6: Run Odin3 v3.07.exe on the computer as Administrator [To do so, right-click on Odin.exe file then click on Run as administrator from context menu.]

Step-7: Connect the tablet to the computer using USB cable while it is in Download Mode. Wait for some time until Odin detects the device. When the tablet is connected to the computer successfully, an Added message will appear under Odin message box. Also, the ID:COM box in Odin will turn blue with the COM port number indicating successful connection

Note: If the Added message does not come then try another USB port, try the one located at the back side of the computer. In case Odin still fails to recognise the device then re-install USB driver.

Step-8: Select these files extracted from P5100XXDMH1 folder to install on the tablet

a) Click the PDA button and select the file with .tar.md5 extension

b) Click the Phone button and select file with MODEM in its name

c) Click the CSC button and select file with CSC in its name

d) Click the PIT and select the .pit file

Note: Ignore the last three steps (b, c and d) in case such files are not found.

Step-9: Configure Odin settings. Ensure Auto Reboot and F.Reset Time checkboxes are selected. Uncheck Re-Partition option and select it only when a .pit file is being used

Step-10: Click the Start button in Odin. The installation process should begin now and would take few minutes to complete

Step-11: When the installation process is completed, the tablet will restart automatically. And soon a PASS message with green background will appear in the extreme left box at the very top of Odin. Unplug the USB cable from the tablet to disconnect it from computer

XXDMH1 Android 4.2.2 Jelly Bean official firmware should now be installed and running on the Galaxy Tab 2 10.1. Head over to Settings>> About tablet to verify the new software version of the device.

How to fix bootloop issue:

If the Galaxy Tab 2 10.1 gets stuck at boot animation or experience bootloop (after step-11) then go to recovery mode by pressing and holding Volume Up and Power buttons together. In the recovery mode, perform data wiping task by selecting wipe data/factory reset then select Wipe Cache Partition.

When the wiping task is done, reboot the phone by selecting reboot system now.In recovery mode, use Volume buttons to navigate between options and Power button to select the desired option. It should be noted that performing data wiping task will erase the internal memory data of the device.

Also read: Android 4.2.2 Official Update Rolling for Galaxy Tab 2 10.1 (Wi-Fi) P5110 [How to Install]

[Source: Honai of Android]