The Android 4.2.2 Jelly Bean official software update with base firmware XXDHM2 is available to download for the Wi-Fi version of the Galaxy Tab 2 10.1 with model number GT-P5110, which is currently running on Android version 4.1.2.

The update is now available for Galaxy Tab users in Australia and is expected to reach other regions soon. Users can grab the update via OTA and through Samsung Kies.

Galaxy Tab 2 10.1
Samsung has released Android 4.2.2 update for the Galaxy Tab 2 10.1 P5110.

Click here for our step-by-step guide to install XXDMH2 Android 4.2.2 Jelly Bean on Galaxy Tab 2 10.1 P5110.

Galaxy Tab users who have already updated their devices to Android 4.2.2 and currently looking for a root method, may follow our step-by-step guide. The tutorial uses CF-Auto-Root file released by recognised XDA developer, Chainfire. The CF-Auto-Root is said to be the most safest root method available so far. It is firmware independent; it completely supports Android 4.2.2 and future firmware as well.

IBTimes UK reminds its readers that it will not be held liable for any damage to the device. Users are advised to verify that their devices meet following requirements.


1) Install USB Driver for Samsung Galaxy Tab 2 10.1 to transfer files between the Android device and computer.

2) Enable USB Debugging Mode on tablet to connect the Android device with the computer and use the Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option then check USB Debugging Mode.]

3) As the tutorial might wipe out all data of the Galaxy tablet, create a backup. If the device is having any custom recoveries such as CWM/TWRP already installed then backup the data using the recovery.

4) The Galaxy tablet should have above 80% battery charge.

5) The device should be factory unlocked and not locked to a particular carrier.

6) The tablet will lose its manufacturer's warranty once it is rooted but users can reclaim the warranty back by unrooting the device later.

7) The CF-Auto-Root file works only on the Wi-Fi version of Galaxy Tab 2 10.1 GT-P5110. As applying this to any incorrect variant might brick the device, verify the model number of the Galaxy tablet by selecting Settings>> About tablet>> Model number.

Steps to root Samsung Galaxy Tab 2 10.1 GT-P5110 on Android 4.2.2 Jelly Bean

Step-1: Download CF-Auto-Root package for Samsung Galaxy Tab 2 10.1 to computer

File name:

Step-2: Extract the downloaded root zip to get CF-Auto-Root-espresso10wifi-espresso10wifixx-gtp5110.tar.md5 file within it

Step-3: Download Odin 3.07. Extract the Odin zip to get Odin3 v3.07.exe with some other files

Step-4: Turn off the Galaxy tablet and wait for five to six seconds for vibration to confirm complete power off

Step-5: Place the tablet it into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on the screen. Now press the Volume Up button to continue to enter into Download Mode

Step-6: Run Odin3 v3.07.exe as Administrator

Step-7: Connect the Galaxy Tab to computer using USB cable while it is in Download Mode. Wait for some time until Odin detects the tablet. When the device is connected successfully, an Added message will appear under Odin message box. Also, the ID: COM box will turn blue with the COM port number indicating successful connection

Note: If the Added message does not come then try another USB port, try the one located at the back side of the computer. If Odin still fails to detect the device then re-install USB driver.

Step-8: In Odin, click the PDA button and select CF-Auto-Root-espresso10wifi-espresso10wifixx-gtp5110.tar.md5 file

Step-9: Verify Auto Reboot and F.Reset Time checkboxes are selected in Odin. But uncheck Re-Partition option

Step-10: Click the Start button in Odin to begin installation

Step-11: When the flashing process is completed, the tablet will restart automatically. And soon a PASS message with green background will appear in the extreme-left box at the top of Odin. Now safely unplug the USB cable from the tablet to disconnect it from computer

As the Galaxy Tab 2 10.1 boots up, it should be rooted successfully on Android 4.2.2 Jelly Bean firmware. Users may install any app that requires root permission. Also to verify the root status, install Root Checker app from Google Play Store.

Also read: Transfer Data from Old iPhone to iPhone 5s/iPhone 5c [TUTORIAL]

[Source: Honai of Android]