Update Galaxy S3 GT-I9300 to Android 4.2.2 Jelly Bean via SentinelROM
Galaxy S3 GT-I9300 users can now enjoy the latest custom features of Android 4.2.2 Jelly Bean firmware, thanks to the release of SentinelROM by XDA Developers recognised contributor, Sentinel196. Earlier, the same XDA Developers member released the SentinelROM for Galaxy S2 I9100 to squeeze every ounce of power from the phone for top-notch performance with excellent battery-life.
The custom ROM is reportedly compiled with Linaro toolchain from modded CyanogenMod 10.1 (CM10.1) source, and is one of the most popular ROMs for Nexus 10, Nexus 7, Nexus 4 and HTC One X.
The SentinelROM is built to enhance the CM10.1 features, besides offering faster gaming and web browsing experience as well as excellent battery-life. The ROM is reportedly more stable and functional than the CyanogenMod nightly ROMs that are not fully optimised for performance.
Here is the complete list of features supported on SentinelROM:
Compiled with Linaro toolchain for extreme performance
Compiled from latest CyanogenMod 10.1 source by Sentinel196, not a 'cooked ROM'.
Increased volume (not quiet like most CM based ROMs)
Samsung Galaxy S3 GT-I9300 gets a high-scoring result while running Android 4.2.2 SentinelROM in AnTuTu Benchmark (credit: XDA Developers)
CyanogenMod 10.1 based SentinelROM and the instructions given in this guide are applicable to the international variant Galaxy S3 GT-I9300 model only and will not work on any other device. Verify your device's model number by navigating to Settings > About Phone.
Back up important data and settings on the phone. It is recommended that you use one of the custom recovery tools such as ClockworkMod (CWM) or TWRP for data backup, as it creates a backup with complete image of your current phone setup. Avoid using Samsung KIES or ROM manager, as they lack flexible options for data backup and may cause issues with the newly installed firmware.
Ensure USB Debugging mode is enabled on the phone by navigating to Settings > Developer Options (if the phone is running Android 4.0 or later) or go to Settings > Applications > Development (if the device is running Android 2.3 or earlier). If your device is running Android 4.2 or later, do the following steps:
Go to Settings > About Phone
Scroll down to the bottom and select Build Number
Tap Build Number about seven times until the hidden Developer Options is unlocked or revealed under Settings. Then enable USB Debugging mode by selecting the checkbox.
Ensure that the device has at least 85 percent battery charge.
Make sure that the phone is factory unlocked and rooted with ClockworkMod (CWM) recovery installed on it.
Double check to confirm that Wipe Cache partition and Dalvik Cache Wipe is done before continuing from the Recovery Mode
Samsung KIES will not recognise your phone after installing the firmware, as it is a custom release.
The instructions provided in this guide are meant for reference purpose only. IBTimes UK reminds its readers that it will not be held liable if the device is damaged or bricked during or after the ROM installation. Users are advised to proceed at their own risk.
How to Install Android 4.2.2 Jelly Bean Based SentinelROM on Galaxy S3 GT-I9300
Step 2 - Connect and mount the Galaxy S3 USB mass storage on computer with USB cable.
Step 3 - Copy the downloaded ROM and Google Apps zip files to the root folder on your phone's SD card.
Step 4 - Power off your phone and disconnect its USB cable from computer.
Step 5 - Press and hold Volume Up, Home and Power buttons together until the phone boots into CWMRecovery. Now, take a Nandroid Backup of your phone's existing ROM, so that it can be restored later if the new ROM fails to boot, or you want to return to the previous ROM. To create a backup, click Backup and Restore and then hit Backup again on next screen.
Step 6 - Perform a full data wipe in recovery. To do so, perform Wipe Data/Factory Reset and wait until the process completes. Then perform Wipe Cache Partition followed by Wipe Dalvik Cache from advance option in recovery. Then navigate to Flash zip from SD card option and hit Power button to select it.
Step 7 - Tap the Power button again and click Choose zip from SD card.
Step 8 - Use Volume keys to navigate to Android 4.2.2 SentintelROM zip file that you copied earlier to your phone and select it by tapping the Power button. Confirm the ROM installation on next screen and the installation procedure will begin.
NOTE:Repeat this step (Step 8) for installing Google Apps as well.
Step 9 - Once both the SentinelROM and Google Apps are installed, hit Go Back and choose Reboot System Now in the Recovery menu. The phone will reboot automatically and the first boot may take about five minutes to complete. So, leave it alone.
Your Galaxy S3 GT-I9300 is now running on the latest CM10.1 based SentinelROM custom ROM. Go to Settings > About Phone to verify the firmware installed.
For further assistance, check out the video tutorials below (courtesy of XDA developers):
To report problems or to leave feedback about this article, e-mail:
To contact the editor, e-mail:
This article is copyrighted by IBTimes.co.uk, the business news leader